Water-repellent impregnation product for building materials.
OPTIFLEX PM 700 is a water-based impregnation product specifically developed for waterproofing mineral building materials.
It is safely used in construction. It provides water-repellent properties to walls.
It facilitates easy application immediately after production on low-fired clay products and roof tiles.
It is safely used on facing bricks, floor tiles, planters, aerated concrete, gypsum and gypsum-based fiberboards, perlite, vermiculites, and lightweight fillers and insulation materials such as aerated concrete granules.
Application instructions must be strictly followed when producing colored building materials.
ADVANTAGES
OPTIFLEX PM 700 is super concentrated. It contains a high amount of active ingredient. It provides advantages in storage and cost.
It is diluteable with water and mixes in any ratio.
It provides long-lasting and durable water repellency even at low concentrations.
It adheres chemically to surfaces. Its high penetration potential provides additional repellency.
It creates an excellent beading effect on the surface after application. It forms a hydrophobic layer by preventing water absorption on the surface.
It creates surfaces with a water vapor permeable and UV stable structure.
It extends the life of the application and the surface.
It provides high resistance to water by reducing water absorption.
It reduces cracking and blistering due to freeze-thaw cycles and efflorescence.
INSTRUCTIONS FOR USE
OPTIFLEX PM 700 is super concentrated and must be diluted with water before use. Tap water can be used for dilution. Add water to a bucket or immersion basin. Add OPTIFLEX PM 700 to the water while stirring vigorously. Before using the product, small-scale preliminary tests should be carried out in a suitable area to determine the correct dilution ratio and water repellency properties.
Diluted solutions of OPTIFLEX PM 700 are used for surface impregnation. The most suitable way to obtain a sufficient and even coating is to impregnate wall materials by the immersion method. Two coats are not recommended. Because the exterior walls of buildings are irregular, applying two coats will result in white spots on the surface.
USAGE AMOUNT
Determined according to need for the desired water repellency.
|
PRODUCT CODE |
WEIGHT |
PIECE |
FORM |
|
OPT6409063 |
30 KG |
1 |
LIQUID |
|
OPT6409066 |
60 KG |
1 |
LIQUID |
|
OPT6409062 |
200 KG |
1 |
LIQUID |
|
OPT6409061 |
1000 KG |
1 |
LIQUID |
Brand: Optimal
Antibacterial, colorless, odorless hand washing liquid. OPTIDES PERSON is a colorless, odorless handwashing product with bacteriostatic properties, especially used in food processing…
Brand: Optimal
Oxygen Scavenger and Carbon Dioxide Corrosion Inhibitor for Steam Generator OPTIGARD MR 45 prevents corrosion caused by oxygen and carbon dioxide. It was specifically developed to…
Brand: Optimal
Brand: Optimal
Brand: Optimal
Super Concentrated Multi-Purpose General Cleaning Product GOLD MEDAL is a concentrated, multi-purpose general cleaning product with high-level grease and dirt dissolving properties,…
Brand: Optimal
Sünger İçin Kalıp Ayırıcı REMOLD SPONGE, cold cure sünger uygulamalarında kullanılan solvent içermeyen kalıp ayırıcı üründür. ÜRÜN…
Brand: Optimal
Powder, Alkaline Degreasing Product that Cleans Carbonized Layers and Contamination Formed on Metal Surfaces in Dipping and Spraying Systems
Brand: Optimal
Super Concentrated Enzymatic Ultrasonic Cleaner OPTIGARD® SONIC 350 EZ is designed for pre-cleaning and decontamination of instruments in ultrasonic baths. It is a highly effective…
Brand: Optimal
Neutral Cleaning Product for Floor Cleaning Machines OPTIMAT VF X909 is a water-soluble, environmentally friendly, super-concentrated, neutral, foam-controlled industrial floor cleaning…
Brand: Optimal
Powder, Alkaline Product Used in the Metal and Automotive Industry and in Repair Shops for Cleaning All Metals and Metals Such as Aluminum Alloys, Copper, Tin, Zinc After Cutting,…
