pH Regulator for Closed Circuit
OPTIGARD PH 40 is a liquid product containing organic acids, designed for systems with high pH levels.
It is used to lower the pH to a level suitable for corrosion control.
It is used for pH control in steam boilers and other closed-circuit installations. Its ingredients are suitable for use in steam generation in contact with food.
It prevents the formation of calcium and magnesium deposits by binding to these ions.
OPTIGARD PH 74 should be used in systems with low pH levels.
|
PRODUCT CODE |
WEIGHT |
PIECE |
FORM |
|
EH4877533 |
30 LT |
1 |
LIQUID |
|
EH4877536 |
60 LT |
1 |
LIQUID |
Brand: Optimal
Brand: Optimal
Brand: Optimal
Epoxy Protection and Coating Product for Concrete Surfaces OPTIFLEX EP is an epoxy-based coating product suitable for floors exposed to moderate mechanical stress. It is resistant…
Brand: Optimal
Yağ, İs ve Karbon Sökücü OPTILINE MERCAPTO, konsantre özel solvent bileşimi ve yüksek alkali formüllü yapısı ile yüksek ısıya veya…
Brand: Optimal
Silicone-Based Mold Release Spray MR 700 prevents the part from sticking to the mold by forming a thin film layer between the mold and the manufactured product. It allows the part…
Brand: Optimal
Brand: Optimal
Brand: Optimal
Brand: Optimal
Powder Product Forming Yellow Chromate on Aluminum Surface by Dipping, Spraying and Brushing Methods, Compliant with MIL-C-5541 B, MIL-C81706 and MIL-DTL-5541 Norms OPTICOAT CR 120…
Brand: Optimal
Neutralization and Surface Passivation After Chemical Cleaning OPTIGARD NEUTRAL eliminates the risk of corrosion that may occur in the future due to even a small amount of acid remaining…
