Product Groups

Optimat VF X909

Brand: Optimal

Product Details

Neutral Cleaning Product for Floor Cleaning Machines

OPTIMAT VF X909 is a water-soluble, environmentally friendly, super-concentrated, neutral, foam-controlled industrial floor cleaning product that is safely used in all industrial areas to remove mineral/synthetic mineral oil, vegetable oil, grease, rubber friction marks, forklift tire marks, and water-soluble dirt from all hard surfaces, and for floor cleaning.

It is safely used with automatic and manual floor washing machines for cleaning glossy floors in shopping malls, parking lots, factory floors, and for cleaning oil and dirt residues from hard surfaces such as concrete, tile, PVC, epoxy, and ceramic tiles, as well as surfaces coated with crystallized polish such as marble or travertine.

It leaves no sticky residue, tape, or adhesive marks on the surface.

It is safely used for cleaning factory rubber or plastic conveyor belts, plastic surfaces, ceiling coverings, and PVC doors and windows.

It is suitable for wet mopping and disc washing systems.

It is safely used for removing strong oils, soot, grime, and dirt, polymer and wax coatings, and for cleaning construction sites.

ADVANTAGES

OPTIMAT VF X909 is suitable for all types of automatic floor cleaning machines, including battery-powered, electric, or automatic machines, and continuously operating systems.

It protects floor cleaning machines, piping equipment, and parts.

Its neutral pH formulation ensures excellent material compatibility.

Ideal for daily and periodic floor cleaning.

Suitable for all industrial areas. Provides precise and thorough cleaning.

Suitable for polished and glossy floors.

Suitable for cleaning all water-resistant surfaces such as tiles, stone, concrete, linoleum, PVC, and rubber.

It has controlled foaming. It eliminates the need for additional foam suppressants.

Protects the vacuum pump.

Super concentrated and efficient. Provides excellent cleaning results even with minimal usage.

Has a pleasant and refreshing scent.

Its environmentally friendly formula ensures a high ecological standard.

INSTRUCTIONS FOR USE

OPTIMAT VF X909 is suitable for cleaning with floor cleaning machines and for floor washing methods such as spraying, dipping, wiping, and wet mopping.

Add to the clean water tank of the cleaning machines as needed, according to the table below.

Clean surfaces mechanically and rinse with clean water.

Excellent results are obtained even with minimum dosage when cleaning delicate floors.


AMOUNT OF USE

Polished Glossy Floors

:

1/200 ( 0,5%)

Periodic Cleaning

:

1/100 (1%)

Oily/Dirty Floors

:

1/60 (1,7%)

Heavy Oily/Greasy Surfaces

:

1/30 (3%)

Tire Mark Remover

:

1/2-1/10 (10%-50%)


 

PRODUCT CODE

WEIGHT

PIECE

FORM

OPT77310393

30 LT

1

LIQUID

OPT77310396

60 LT

1

LIQUID

OPT77310392

200 LT

1

LIQUID

OPT77310391

1000 LT

1

LIQUID

Related Products

Optilab Sentil 258
Optilab Sentil 258
Synthetic-Based Gear Oil

Brand: Optimal

   

Optilab Cerox
Optilab Cerox
NSF Approved Synthetic Based Compressor Oil

Brand: Optimal

Optimold  C70
Optimold C70
Mold Protective Oil

Brand: Optimal

Mold Protective Oil OPTIMOLD C70 is a long-lasting, water-insoluble mold protection oil that forms a long-lasting, dry protective layer. It provides a strong, full coating and quick…

Remold MET70
Remold MET70
Metal Kalıp Ayırıcı Yağ

Brand: Optimal

Metal Kalıp Ayırıcı Yağ REMOLD MET70, metal kalıba yapılan dökümlerde metalin kalıptan kolay ve temiz bir şekilde ayrılmasını sağlar. Aynı zamanda metal ile…

Optican Cover
Optican Cover
Electronic Circuit Board Cover Product

Brand: Optimal

Electronic Circuit Board Cover Product OPTICAN COVER is a non-conductive coating applied to electronic circuit boards. By creating a flexible and waterproof film layer on the board,…

Optibiol Max
Optibiol Max
Biological Heavy Oil Remover

Brand: Optimal

Biological Heavy Oil Remover OPTIBIOL MAX is a very powerful, solvent-free degreaser and cleaner that adheres to vertical surfaces without running, thanks to its high adhesion. It…

MR 500
MR 500
Silikon Bazlı Kalıp Ayırıcı Sprey

Brand: Optimal

Silikon Bazlı Kalıp Ayırıcı Sprey MR 500, kalıp ile üretilen mamul arasında ince bir film tabakası oluşturarak parçanın kalıba yapışmasını önler.…

Optigard Ph 40
Optigard Ph 40
pH Regulator for Closed Circuit

Brand: Optimal

pH Regulator for Closed Circuit OPTIGARD PH 40 is a liquid product containing organic acids, designed for systems with high pH levels. It is used to lower the pH to a level suitable…

OPTICOR WX 5500
OPTICOR WX 5500
High Performance Corrosion Inhibitor for Copper Wire Drawing and Alloys

Brand: Optimal

High Performance Corrosion Inhibitor for Copper Wire Drawing and Alloys   OPTICOR WX 5500 is a water-soluble corrosion inhibitor specifically designed for application on copper…

OPTICOAT NT 101 FM
OPTICOAT NT 101 FM
Nanotechnological Ceramic Coating Product

Brand: Optimal

Nanotechnological Ceramic Coating Product OPTICOAT NT 101 FM,çelik, galvaniz ve aluminyum yüzeyler için fosfat ve VOC içermeyen, oda sıcaklığında nano…

We use cookies on our website in order to provide you a better, faster and safer use. Check our Cookie Policy.