.jpg)
.jpg&resize=60x60)
Welding and Surface Cleaning Liquid
OPTINOX B 100 removes all types of oxidation, pitting, heavy rust, and weld stains on stainless steel, and passivates the surface.
By specifically strengthening it with CNF, base metal loss is minimized. It does not damage or yellow the surface. It imparts a permanent, uniform silver color to the surface. By passivating the surface, it prevents future rust and pitting.
The surface of stainless steel materials is protected against corrosion, pitting, and rusting by a thin, naturally occurring passive layer rich in chromium oxide under suitable conditions. This passive layer forms only on clean surfaces containing sufficient chromium in the alloy and in environments containing sufficient oxygen.
The resulting passive chromium oxide layer is self-repairing under normal conditions, even if the surface is subjected to mechanical damage.
Heat and mechanical processes such as welding, cutting, drilling, cutting, bending, drawing, and shaping damage this layer. To recreate the passive layer, surface weld stains and contamination must be completely removed using chemical methods. OPTINOX B series pickling products create the passive layer.
INSTRUCTIONS FOR USE
OPTINOX B 100 is a fluid liquid and should not be applied to the surface. Heavy oil on the material should be removed with a suitable chemical. OPTINOX B 100 is added to the parts placed in an acid-resistant plastic container. Depending on the contamination, material type, and ambient temperature, it can be diluted 1:1 with water.
It is recommended to mix the bath and apply it in well-ventilated areas. Parts removed from the bath should be rinsed with clean, pressurized water.
DOUBLE USE
Reaction Time: AISI 304, 304L, etc.: 30-60 minutes, AISI 316, 321, etc.: 60-90 minutes. Consumption: 10-15 m²/kg.
|
PRODUCT CODE |
WEIGHT |
PIECE |
FORM |
|
EH1464033 |
35 KG |
1 |
LIQUID |
|
EH1464037 |
70 KG |
1 |
LIQUID |
|
EH14640320 |
220 KG |
1 |
LIQUID |
|
EH14640310 |
1200 KG |
1 |
LIQUID |
Brand: Optimal
Galvanized, Steel, Aluminum Surface Degreasing, CRS and Iron Surface Iron Phosphate Layer Creation Product
Brand: Optimal
Online Scalp Cleaner OPTIGARD SMAC 100 prevents calcium carbonate crystal formation in steam boilers and generators during system conditioning. It effectively disperses iron oxides,…
Brand: Optimal
Drinking and Usage Water Disinfectant OPTIGARD LEO HP5 is effective against gram-negative and gram-positive bacteria and viruses at the appropriate application dose. It contains chemical…
Brand: Optimal
Rust and Scale Removal Product for Ferrous and Non-Ferrous Metals
Brand: Optimal
A two-phase product that removes wet and powder paint from aluminum and sheet metal surfaces without damaging the chromate or phosphate layer on the surface. Please contact our technical…
Brand: Optimal
Durulamasız Kromatlama Ürünü OPTICOAT CR 9500 RL is a special Cr(+6)-containing product used in the surface pretreatment of aluminum, steel, zinc, and its alloys. It…
Brand: Optimal
Dip Type Welding Spatter Preventer WELD DEEP is a dipping type product in gel form developed to prevent hot burrs from sticking to the torch in gas shielded welding. PRODUCT CODE WEIGHT…
Brand: Optimal
Galvanized Welding Burr Preventer WELD G10 is a unique, high-performance spatter protection product that protects workpieces from high-energy spatter adhesion in metal welding and…
Brand: Optimal
Brand: Optimal
Brake Pad Cleaning Spray Although BRAX is composed of solvent-based ingredients, it is not flammable or combustible. It has no corrosive effects on metals. It quickly removes petroleum-derived…
