Welding and Surface Cleaning Spray
OPTINOX B 300S removes welding and heat treatment stains, oxidation, pitting, light dirt, and oil from stainless steel surfaces in a single process, preparing the surface for passivation. It is suitable for cold-drawn AISI 304, 316, and 321 and its derivatives.
The surface of stainless steel materials is protected against corrosion, pitting, and rust by a thin passive layer rich in chromium oxide, which naturally forms on the surface under suitable conditions. This passive layer forms only on clean surfaces containing sufficient chromium in the alloy and in environments containing sufficient oxygen.
The resulting passive chromium oxide layer is self-repairing under normal conditions, even if the surface is subjected to mechanical damage.
Heat and mechanical processes such as welding, cutting, drilling, cutting, cutting, bending, drawing, and shaping damage this layer. This corrosion-resistant passive layer must be regenerated.
To regenerate the passive layer, weld stains and contamination must be completely removed from the surface using chemical methods.
OPTINOX B series etch products guarantee the formation of a passive layer.
INSTRUCTIONS FOR USE
OPTINOX B 300S removes heavy dirt and oil from the surface with OPTINOX SURFACE. Mix the contents of the OPTINOX B 300S canister until homogeneous. Spray the mixture onto the surface with a hand sprayer or a compressed air pump. After the reaction time (the surface turns green), rinse with clean water at 100–150 bar pressure. Allow to dry naturally. Do not touch.
Caution: Do not apply in sunlight. Do not apply to very hot surfaces (+25°C). The ideal application temperature is 15–20°C. Extend the application time in cold weather.
DOUBLE USE
Reaction Time: 45–90 minutes (at 20°C). Consumption: 4–6 m²/kg.
|
PRODUCT CODE |
WEIGHT |
PIECE |
FORM |
|
EH1454023 |
35 KG |
1 |
LIQUID |
|
EH1454027 |
70 KG |
1 |
LIQUID |
|
EH14540220 |
220 KG |
1 |
LIQUID |
|
EH14540210 |
1200 KG |
1 |
LIQUID |
Brand: Optimal
Brand: Optimal
Concentrated Metal Surface Preparer OPTICIDE POWERSOL: Used to remove oil, rust, and dirt from metal surfaces before painting and coating. It microscopically penetrates the metal surface…
Brand: Optimal
Lithium Silicate Based Liquid Concrete Hardener OPTIFLEX LS 12 SC is a lithium-based liquid concrete hardener with a high concentration structure, used for thickening, hardening and…
Brand: Optimal
Brand: Optimal
Brand: Optimal
Vibrasyon Makineleri İçin Yağ ve Çapak Alma Sıvısı OPTILINE VIBRASOL, metal parçalarının çapak alma, parlatma ve yağ alma işlemleri için…
Brand: Optimal
Water-Based Concentrated Mold Oil OPTIMOLD S90 is a concentrated, water-based, low-foaming, highly stable corrosion preventive product used as a corrosion preventive emulsion on steel.…
Brand: Optimal
Garbage Container Cleaning and Disinfection Liquid OPTIDES WASTE HP: A concentrated heavy-duty grease, dirt, and disinfectant product. It can be used safely in all waste collection…
Brand: Optimal
Biodispersant for Cooling Water Thanks to its cationic surfactant and polycarboxylic acids, OPTIGARD DAC 70 disperses deposits and contaminants in the system, preventing them from…
Brand: Optimal
Limestone, Lime Remover OPTIGARD SKP 80 is a combination of organic acids supplemented with special corrosion inhibitors formulated for the cleaning of deposits (limestone, metal oxides,…
