Stainless Surface Passivation Product for the Healthcare Industry
OPTINOX CITRON 140 is a high-quality chemical mixture containing special inhibitors and surfactants formulated for the cleaning and passivation of stainless steel surfaces, special alloys, titanium, and precious metals.
It guarantees the highest possible chromium oxide levels by removing all free iron oxide formations on duplex and austenitic stainless steel surfaces.
It can be used safely in combined machines, ultrasonic systems, and washing units.
It meets the requirements of ASTM A967, ASTM A380, ASTM B600, and AMS 2700 standards.
It is also compatible with magnetic systems and non-magnetic surfaces.
INSTRUCTIONS FOR USE
Before using OPTILINE CITRON 140, surfaces should be cleaned of impurities, oil, dirt, and work residue with OPTILINE ULTRASOL. If passivation is to be performed in ultrasonic machines, the workpieces to be passivated should be: Stainless or polypropylene tanks are immersed in a solution prepared by adding 1 part OPTINOX CITRON 140 to 6-13 parts ultrapure water at a working temperature of 40-80°C for 5 to 30 minutes. Titanium parts should be operated at 80°C. After the process, the parts should be rinsed with ultrapure water. Drying ovens or compressed air can be used to speed up the drying process. The solution should be replenished at the same rate as it decreases over time. The pH of the pool should be +0.1 units higher than the initial pH. It works effectively in the pH range of 1.8-2.0.
USE DOSAGE
Use by diluting 1/7 - 1/14 with ultrapure water.
|
PRODUCT CODE |
WEIGHT |
ADET |
FORM |
|
OPT6329153 |
30 LT (33 KG) |
1 |
LIQUID |
|
OPT6329156 |
60 LT (66 KG) |
1 |
LIQUID |
|
OPT6329151 |
1000 LT (1.111 KG) |
1 |
LIQUID |
Brand: Optimal
Solvent Bazlı, NDI Sistem Poliüretan Elastomer Kalıp Ayırıcı REMOLD PS800, NDI bazlı poliüretan sistemler için ısıyla kürlenen solvent bazlı kalıp ayırıcıdır.…
Brand: Optimal
Heavy Rust, Mineral, Silica and Sediment Remover OPTICIDE GOLDA: Effective in cleaning very heavy dirt. It penetrates into mineral deposits, silicon residues, rust, dirt, scale formations,…
Brand: Optimal
Industrial Cleaning Solvent OPTISOL IPA-MIX is safely used in white goods manufacturing, industrial heater and cooler production, cleaning surfaces of manufacturing equipment in the…
Brand: Optimal
Dip Type Welding Spatter Preventer WELD DEEP is a dipping type product in gel form developed to prevent hot burrs from sticking to the torch in gas shielded welding. PRODUCT CODE WEIGHT…
Brand: Optimal
Ice and Snow Melter OPTICAN SNOW prevents snow from sticking to the road by melting the film layer it creates. It is long-lasting. It is applied very quickly. It saves labor and time.…
Brand: Optimal
Brand: Optimal
Acidic Cleaner for Pool Ceramics OPTIPOOL CALCEX SURFACE is used safely to remove limescale buildup on all acid-resistant surfaces without damaging them. Regular use prevents limescale…
Brand: Optimal
pH Regulator for Closed Circuit OPTIGARD PH 40 is a liquid product containing organic acids, designed for systems with high pH levels. It is used to lower the pH to a level suitable…
Brand: Optimal
Water Repellent Methylhydrogen Polysiloxane Impregnation Product OPTIFLEX MHS 9400 is a low-viscosity, non-toxic, solvent-free methylhydrogen polysiloxane product with trimethylsilyl…
Brand: Optimal
A two-phase product that removes wet and powder paint from aluminum and sheet metal surfaces without damaging the chromate or phosphate layer on the surface. Please contact our technical…
