Closed and Open Circuit Lime and Sediment Remover
OPTICIDE ORCA: This chemical product removes limestone, rust, and mineral deposits from cooling systems, heat exchangers, boilers, and water pipes by breaking them down at micron levels during circulation.
It does not harm metals such as copper and metal pipes, and it is successfully used in the construction industry to clean concrete and mortar residue.
It is safely used in the cleaning of sprinklers and pipe systems in humidification units in the textile industry, injection molding machines, molds, and cooling systems used in the plastics industry.
It is used for the interior and exterior cleaning of submersible, mud, and pool pumps; for removing lime residue from the floor walls and glass of swimming and ornamental pools; for removing cement residue stuck to the bodywork of vehicles used in concrete mixing and transportation; for removing lime and sediment caused by cooling water in pasteurization lines in canning; and for cleaning surfaces on marble processing machines and machines in the ceramic industry.
INSTRUCTIONS FOR USE
Cooling Systems: Drain the entire system. Refill the system to operating level. Add 10 liters of water to 1 liter of OPTICIDE ORCA. Circulate for 5-6 hours. Measure the pH of the water in the system. Add OPTICIDE ORCA if necessary to maintain the pH between 1.5 and 2. Continue circulation. After 5-6 hours, drain and rinse the system. Repeat the process if necessary.
Direct Use: Mix one part OPTICIDE ORCA with 5 parts water. Apply to the materials with a brush or cloth. Wait for a short time for it to penetrate and remove residue.
Immersion Method: Place the materials to be cleaned in a pool or plastic container and immerse them in the OPTICIDE ORCA and water mixture. Wait until the residue dissolves. Then, remove and rinse thoroughly with water.
USE DOSAGE
Use 1/5 to 1/10 of the product, depending on the total water volume.
| PRODUCT CODE | WEIGHT | PIECE | FORM |
| EH2264603 | 35 | 1 | SIVI |
| EH2264607 | 70 | 1 | SIVI |
| EH22646010 | 1250 | 1 | SIVI |
Brand: Optimal
Coarse-Grained Powder Alkaline Product Used in Bathroom Cleaning
Brand: Optimal
High Performance Corrosion Inhibitor for Copper Wire Drawing and Alloys OPTICOR WX 5500 is a water-soluble corrosion inhibitor specifically designed for application on copper…
Brand: Optimal
Stainless Surface, Anti-Corrosion Barrier Film Forming OPTICOR POL 500 is an effective barrier film-forming protective product used to prevent corrosion and rust on sensitive equipment,…
Brand: Optimal
Brand: Optimal
Parts Cleaning Spray Although MOTTO is composed of solvent-based components, it is not flammable or combustible. It has no corrosive effect on metals. Thanks to its rapid volatility,…
Brand: Optimal
Mold Protective Oil OPTIMOLD C70 is a long-lasting, water-insoluble mold protection oil that forms a long-lasting, dry protective layer. It provides a strong, full coating and quick…
Brand: Optimal
Rust, Discoloration, Oxide, Dirt and Heat Residue Remover Detection Chemical OPTIGARD® AC 380™ is a high-performance cleaning and maintenance product containing special acidic…
Brand: Optimal
Water-Based Concentrated Mold Oil OPTIMOLD S90 is a concentrated, water-based, low-foaming, highly stable corrosion preventive product used as a corrosion preventive emulsion on steel.…
Brand: Optimal
Torch Protection Cream WELD TORCH prevents spatter from sticking to the torch during welding. It protects the torch and extends its life. It does not contain silicone. It does not…
Brand: Optimal
Special Lubricant and Polisher Suitable for Use with Products Containing Diamond-Based Compounds OPTICOR DC L900 is a high-end process product suitable for use with diamond-based products…
