Biofilm Dispersant for Cooling Water
OPTIGARD LEO BFD is a nonionic surfactant designed for cooling towers where the circulating water and system contain contaminants such as sludge, mud, and oil.
It keeps harmful contaminants suspended in the water, preventing them from accumulating in the heat exchanger, tower fill, or other critical areas.
It helps biocides penetrate the biofilm, helping to eliminate microorganisms such as algae, bacteria, fungi, and other fungi.
|
PRODUCT CODE |
WEIGHT |
PIECE |
FORM |
|
EH5007663 |
30 LT |
1 |
LIQUID |
|
EH5007666 |
60 LT |
1 |
LIQUID |
Brand: Optimal
Wood Cleaning and Polishing Product WOODAX is used for cleaning, polishing, and maintaining wood and parquet surfaces. Thanks to its special formula, it provides effective cleaning…
Brand: Optimal
Silicone-Based Mold Release Spray MR 500 prevents the part from sticking to the mold by forming a thin film between the mold and the product. It allows the part to be easily removed…
Brand: Optimal
Liquid Inhibitor Usable for HF Acid Please contact our technical team for detailed information.
Brand: Optimal
Cooling Towers Corrosion and Scale Inhibitor OPTIGARD SPD 25 is a perfect blend of corrosion and scale inhibitors specifically developed for open-circuit cooling systems, containing…
Brand: Optimal
Brand: Optimal
Heavy-duty ultrasonic fluid concentrate, free of phosphate and caustic soda. OPTIGARD® SONIC 112 CRS is designed for pre-cleaning and decontamination of instruments in ultrasonic…
Brand: Optimal
Cleaning Material Containing Anti-Corrosion Components
Brand: Optimal
Natural Particle Hand Cleansing Cream OPTIPER CREAM: Due to its excellent degreasing and subsequent hand repair properties, it is a concentrated cream skin cleanser safely used for…
Brand: Optimal
Cr+6 Chromatization Product, Which Forms a Light Yellow to Brass Yellow Chromate Layer on Aluminum and Aluminum Alloys When Added to Water Please contact our technical team for detailed…
Brand: Optimal
Silicone-Based Mold Release Spray MR 700 prevents the part from sticking to the mold by forming a thin film layer between the mold and the manufactured product. It allows the part…
